|
Static Control
Mats/ESD Matting/ESD
Mats
Great Prices,
Knowledgeable Supplier, Free Shipping,* Reliable Performance!
*Free Shipping Details
SELECT: ESD BENCH MAT OR ESD FLOOR MAT MA
THE
PROBLEM:
Static control matting is an integral component in the successful
manufacturing of today's sophisticated microelectronics. In many cases
the smallest of Electro Static Discharges (ESD for short) often causes
permanent (easy to detect) or latent (much harder to detect) damage to
components, costing the Industry millions of dollars of lost revenues on
a yearly basis. All static control mats are not created equally.
The esd mat's long term electrical conductivity is tantamount to
successfully controlling an ESD event yet finding a supplier that
understands the importance of esd matting can often be a cumbersome,
time consuming nightmare.
THE SOLUTION:
At United we understand the importance of esd matting having supplied,
configured and manufactured custom cut matting as well as full rolls
since 1993. Each roll of our material is rigorously tested to the latest
ANSI ESD standards prior to leaving our factories while custom cuts are
tested twice to insure compliance. If your conditions require grounding
hardware, constant monitors or even wrist straps or heel grounders just
let us know, we have these in stock and ready to add to your mat order
at some of the lowest prices in the industry! At United we have one
goal, to Tame the Static Beast Before it Takes Another Byte!
|
Red Hot Table Top Tri-Layer Anti Static Matting
Special
New! 2' x 3'
ElectraDyne
Tri Layer esd mat, long lasting, permanent
conductivity and easy to clean!
WITH ground cord and Electrical Certification to the
latest ANSI Standards!
Only $29.95!
BUY ONLINE! |
ESD
BENCH MATERIAL OPTIONS |
ESD FLOOR MAT OPTIONS |
|
1)
UltraTough: Extreme Service ESD Table Top Matting works GREAT with our
constant monitors too (push and cinch
type snaps recommended). Not dependant on humidity for conductivity. FULLY
compliant to new ANSI Standards. FIVE year warranty on wear and lifetime
warranty on conductivity. Make ESD and ISO audits painless! PN: 168AS
Buy this material Online in rolls!
Buy this material Online in precuts! |
1)
Ultima HD
floor mats,
EXTREME service, so tough it can be used on thin pile
carpeting with rolling loads (like chairs and carts)! Indestructible esd
protection, not dependant on humidity. Static dissipative. PN: 185AS |
|
2)
UltraComfort: Tri Layer works GREAT with constant monitors, too!
(push and cinch snaps recommended). Not dependant on humidity for
conductivity.
PN: 167AS |
2)
UltraDiamond ESD conductive corrugated flooring runners Permanently
static conductive, not dependant on humidity for conductivity. PN: 194AS |
|
3)
EconoStat; economical, anti static vinyl Indestructible! Note: Highly humidity dependant
and does not meet new requirements for electronic assembly - clean
surface! Perfect for packaging areas. PN: 166AS |
3)
UltraSmooth ESD conductive vinyl ESD floor runners ESD conductive,
smooth (for easy cleaning) yet slip resistant. Highly durable non humidity
dependant, chemically
resistant. PN: 306AS |
|
4)
UltraCushion: ESD & Mechanical Shock protection matting Give your electronics
the comfort they deserve and the ESD protection they DEMAND! Note:
Economical but humidity dependant. PN: 169AS |
4)
Mission
Critical ESD Floor Mats for Static Control Static conductive. EASY
compliance to latest ANSI ESD S20.20-2007! Lifetime wear and conductivity
warranty - ONLY from United SCP! PN:
40220 HS-B |
|
5)
ElectraCushion: Extreme ESD and
Mechanical shock protection matting. A full 3/8 Thick! This tri
layer esd matting works with constant monitors and doesn't require humidity
for it's conductivity. PN: 170AS |
5)
UltraStrong: the toughest ESD Vinyl 3 Layer floor matting in the industry!
Recommended for hard surface covering Permanent non humidity dependant
vinyl, tougher than nails!
PN: 187AS |
|
6)
ElectraTherm: ESD rubber matting. Heat resistant, RoHS compliant,
permanently conductive. Works GREAT with
constant monitors.
Not dependant on humidity for conductivity. PN: 165AS |
6)
EconoStat FM: Type B
solid vinyl floor runner material. Economical, Static dissipative, for hard
surface covering only. Not for use with chair casters. Note: Economical but
humidity dependant - not typically recommended for electronics assembly. PN: 166AS |
|
7)
Ultimat CR WHITE ESD rubber matting.
Clean room compatible, Heat resistant, RoHS
compliant, permanently conductive. Not dependant on humidity for
conductivity. The toughest esd rubber on the
market. Note: this product is not included in our free shipping program. PN: CRSS103AS |
7)
ElectraTex Textured
(corrugated) esd conductive vinyl floor matting. Slip resistant
and NOT dependant on humidity for conductivity. Permanently esd
conductive (<1.0E06) and meets the latest most stringent specifications of
ESD 2020-2007. 97.1 friendly. PN: 305AS |
|
ESD
CONDUCTIVE CHAIR MATS
FOR
CARPETING AND HARD SURFACE FLOORING
Ultimate static control for
mission critical electronics. Meets strict new industry guidelines!
ESD conductive chair mats for carpeting
(PN 40220-C).
ESD conductive laminated chair mats for raised access
hard surface flooring
(PN 40220 HS-A)
ESD conductive chair mats for standard hard surface
flooring (PN 40220
HS-B)
EOS ESD S2020-2007
compliant to 97.1 (static conductive flooring surface).
PERFECT for electronic assembly, Military applications, FAA
Command Centers and others requiring impressive conductivity and
full compliance to the latest most stringent standards! Note:
The above 3 mats do not qualify for our free shipping program.
|
|
ESD ANTI FATIGUE FLOOR MATS |
|
2020
Compliant Interlocking ESD Floor matting. Flexibility,
permanent Conductivity, Outstanding performance.
Interlocking
panels, make your ESD area any width, length, size, shape or configuration.
PN 301AS
|
Textured
economy esd comfort matting. Electrical properties that fall
in the high static dissipative range in humidity above 55%. Economical
but humidity dependant. Not for use with chair casters
and recommended for hard surface covering. PN: 175AS |
|
ElectraStat 183:
Ergonomic support meets SUPERB
electrical decay rates. Unique textured surface, ramped edges and
superb cushioning for employee comfort and safety. Static conductive
for ultimate static control environments. PN: 183AS |
Conductive interlocking anti-fatigue ESD floor mats.
EOS ESD S 2020 compliant! Build to
ANY Length. Best price of any
interlocking conductive mat in the industry. Not recommended for chair
casters but works great on low pile carpeting. PN: 180AS |
|
GROUND CABLES
& HARDWARE |
|
Universal
ESD mat snap kits, easy to install. From push and
cinch to standard. Great selection of UltraStrong hardware.
Buy Online! |
Grounding
Cable Kits:
Heavy Duty bench top, floor mat and common point cords (for simultaneous
attachment of bench mats AND wrist straps to ground). |
|
ULTRASHOCK STOP INSULATIVE SWITCH BOARD MATTING
NEW!
Shock Stop - Highly INSULATIVE
switchboard matting - Protects those working in high voltage
environments, NOT FOR ESD PROTECTION!!! PN: 206AS, 207AS & 208AS
Matting Terms and
Conditions |
CONTACT
UNITED STATIC CONTROL PRODUCTS!
United Static Control Products
P.O.B. 19252, 4878 Lake View Circle
Colorado City, CO 81019
United States of America
Phone: 719 676
3928 Fax: 719 676 3929
24/7
Tech Support (customers only)
719
676 3928 (option 8)
Major Credit
Cards Accepted
© 1993-2010
All rights Reserved
ESD
Flooring,
Mats, Chemicals,
ESD Ionizers, and
Expertise
United SCP Tames the Static Beast BEFORE it Takes Another Byte
This page last updated on
02/05/2010
|