United Tames the Static Beast

UNITED

 Static Control Products

Contact us | Telephone 719 676 3928 |  Search

 

 

Static Solutions CM-1700, CM-1701 and CM-1702

ESD Constant Monitors for Wrist Straps and ESD Mats

Currently In Stock: CM-1700 & CM-1702

CM-1701 Monitors are Unavailable Until further Notice

Click here for constant monitors by AEI

The reliable performance of ESD matting and ESD wrist straps is critical for your product's integrity and final problem free performance. Yet hand testing and logging wrist strap and ESD bench mat performance is a cumbersome, labor intensive, paperwork nightmare. Use of the Static Solutions Monitors continuously verifies the effectiveness of your ESD protected workstation, simultaneously satisfies ISO logging requirements and insures outstanding product quality.

 

CM-1700

Designed for Testing One Technician

(does not test matting)
 

CM-1700 ESD Constant MonitorPhoto

The CM-1700 ESD Wrist Strap Constant Monitor: The Static Solutions CM-1700 is designed to test a person, their wrist strap and the subsequent attachment to a reliable ground. Issues are caught immediately and on a continual basis.

Constant monitors often negate the need to test the wrist straps and log the results at another station. Should the wrist strap or connection to the technician fail the CM-1700 provides both a visual and audible alarm.

The unit may be adjusted for impedance and contains an on/off switch. Each unit is provided with a NIST calibration certificate.

  • 100% continuous monitoring.

  • Works with standard one conductor wrist straps/cords.

  • New technology -capacitance/impedance hyper technology.

  • NIST calibration included with certificate.

  • Visual LED, audio piezo sound.

  •  AC powered or 9 volt battery operated.

  • Off / On switch

  • Set points can be adjusted for impedance, capacitance and resistance to ground.

Download Data Sheet (2 megs)     In house Calibration Instructions

 

Our Price $50.31

Click HERE to Buy Online!

 


CM-1701

Designed for Testing One Technician and One ESD Mat

Note: This item is currently out of inventory until further notice
 

CM-1701 ESD Constant Monitor Photo

The Static Solutions CM-1701 is designed to test a person, their wrist strap AND a workstation ESD mat’s attachment to a reliable ground source on a continual ongoing basis. The unit is designed to work with all standard wrist straps (expensive dual phono jack wrist straps are NOT required).

 

The unit is designed to work with all 3 layer ESD mats including our 167-AS and 168-AS premium ESD bench mats and any 2 layer mat containing a conductive bottom surface (like our ElectraTherm 165-AS). Should the Technician or the mat’s connection to ground fail, the CM-1701 provides an immediate visual and audible alarm. The unit may be adjusted for impedance and contains an on/off switch. Each unit is provided with a NIST calibration certificate.

  • 100% continuous monitoring.

  • Works with standard one conductor wrist straps/cords.

  • New technology -capacitance/impedance hyper technology.

  • NIST calibration included with certificate.

  • Visual LED, audio piezo sound.

  •  AC powered only.

  • Off / On switch

  • Set points can be adjusted for impedance and capacitance of  the technician and the resistance of the ESD mat to Ground.

Download Data Sheet (2 megs)     Download CM-1701 Users Manual     In house Calibration Instructions

Our Price $71.61

Click HERE to Buy Online!

 


CM-1702

Designed for Testing Two Technicians

(does not test ESD matting)
 

Phto: CM-1702 by Static Solutions

The CM-1702 is designed to test TWO Technicians', their wrist straps and their impedance and continuity to a reliable ground on a continual, ongoing basis. Should the Technician’s primary grounding fail the CM-1702 provides an immediate visual and audible alarm.

 

The unit may be adjusted for impedance and resistivity limits and contains an on/off switch. Each unit is provided with a NIST calibration certificate. This unit is not designed for use in testing ESD matting.

 

  • 100% continuous monitoring.

  • Works with standard one conductor wrist straps/cords.

  • New technology -capacitance/impedance hyper technology.

  • NIST calibration included with certificate.

  • Visual LED, audio piezo sound.

  •  AC powered only.

  • Off / On switch

  • Set points can be adjusted for impedance and the capacitance of  the technician and their resistance to a reliable electrical ground.

Download Data Sheet (2 megs)     In house Calibration Instructions

Our Price $118.07

Click HERE to Buy Online!

 

 

Contact United Static Control Products

© 1996 - 2023 All rights Reserved

This page last updated on

04/04/2023