Static Control Products
SL-003 Triple Fan Overhead Ionizer
Our SL-003 static control 3 fan overhead ionizer provides a wide yet powerful output of balanced (+/- 5 volts) ions making it the perfect selection for medium to large static control esd workbenches. Unlike many ionizers that require contaminant free air and continual maintenance, the SL-003's steady-state, self balancing circuitry continuously adjusts to compensate for emitter point wear, line voltage fluctuations, variations in air velocity and air particulates, keeping maintenance to a minimum and performance at a maximum.
The SL-003 features high output, fully adjustable airflow, on demand overhead lighting, long life tungsten emitters (typical life span three years and easy to replace) and casings manufactured of a light weight aluminum alloy with a static dissipative powder coating for a meticulous high tech finish. Why pay over $1,000 for the privilege of buying this 3 fan ionizer from the high overhead big boys. Call United SCP, save your esd program a substantial amount of money and get the same high quality and performance you demand from a reliable supplier with a great product and a proven track record.
SL-003 3 Fan Overhead ESD Ionizer with Lighting
Powerful Performance - Outstanding Value!
Outstanding quality, ISO Manufactured.
Powerful, robust, and highly reliable.
Up to 330 CFM, fully adjustable output.
Built in emitter point cleaners.
Certificate of compliance at no charge with each unit.
Precision +/- 5 volt offset voltage.
LOW Ozone output (0.03 x 10-6 typical
Self balancing! Never needs adjustment!
Built in energy efficient on demand task lights.
CE Certified, 1 year warranty, designed to last a lifetime.
Meets or exceeds the recommended technical requirements of ANSI/ESD S20.20-2014 tested in accordance with STM3.1
SL-003 Overhead ESD Ionizer
Now Just 736.14 each
Free Shipping (Continental USA Only and details apply)
Decay Test Results
Note the following are overviews, please see manual (included with product) for full details.
Installation Fast Facts: Install energy efficient fluorescent light bulb into ionizer by removing front cover with a screw driver, unpacking bulb, screwing into place and replacing the front panel. The SL 003 is an overhead unit designed to provide ideal coverage for control of electrostatics. Note: Do not insert objects into air intake or outlet grille and do not operate the SL-003 in inflammable or explosive environments. The SL-003 ionizers should be affixed 600 to 900mm (24 to 36 inches) above the work surface with center targeted directly over work area. Avoid drafty locations such as that caused by air conditioning, heater outlets, etc.
Attachment to overhead supports: S hooks and chains may be used for mounting these ionizers to structurally sound ceilings or wire shelves. Chains and mounting hardware should have a minimum safe working load of at least 50 pounds. When mounting the unit to ceilings it is important to check state and local codes to insure compliance. These units are typically hung in the same fashion as an overhead light fixtures (independently attached to the overhead building superstructure). Attachment to suspended ceilings only are typically not compliant with local codes. Mounting to workbench overhead supports: These ionizers may be mounted to work bench overhead shelves and beams using the supplied side mounting bracket in conjunction with angle iron, bolt on L brackets etc. These ionizers may be used either horizontally or vertically.
Electrical Requirements: The SL-003 requires 110VAC /60Hz (standard) or 220VAC / 50Hz (optional) power. These units must be grounded. Each unit is supplied with standard US 3 prong male grounded power plug (standard). Do not modify the plug or use an ungrounded 3 prong receptacle. If an extension cord is required use heavy gauge fully grounded cords only.
Operating Procedure: Activate the SL-003 overhead ionizing blower by turning fan speed knob clockwise. The ionization indicator will illuminate and indicate the presence of ionized air. Airflow speed can easily be adjusted from 0% to 100% output utilizing the fan speed knob. Light is provided via a simple on/off switch. The time required to neutralize electrostatic potential is dependent on distance of ionizer to work surface and speed of fans. When used in electronic assembly the ionized air stream should cover as much of the working area as possible. The constant flow of ionized air prevents items from developing an electrostatic potential and neutralizes electrostatic charges present on objects introduced to the airflow.
Routine Maintenance: Clean emitters as needed (usually bi-weekly in heavy service). To clean ion emitter points press and turn point cleaner knob (located at each air outlet) clockwise approximately one turn and release. Clean air inlet and outlets as needed with a soft brush or vacuum. Periodically test ion output as indicated by your internal esd program or ANSI/ESD S 20.20-2007, TR53, Air Ionizer Compliance Verification (discharge time and offset voltage). Offset voltages of >+/- 50 volts or decay times that exceed user defined specifications (typically <1.1 sec @ 60%rH and 68 deg F. with ionizer positioned 24" from work surface) may indicate the need for replacement of emitters. Normal emitter life is 3 years, replacement emitters are easy to install and available from United SCP.
©1996-2018 All rights Reserved