ESD Floor Mat Accessories

click here to return to the main mat menu

ESD Floor Matting must be grounded to let the static charge accumulated by the mat pass harmlessly to ground. The following ground cord install on ANY esd floor mat in minutes and provides years worth or reliable service.

UltraStrong Floor Mat Ground Cord
Product # 115-AS

Our UltraStrong floor mat ground cord kits are designed to easily attach to any type of ESD Floor Mat and provide a dependable, RELIABLE electrical connection of the mat to a known ground source. Our kits feature a bevel hooded snap assembly (to reduce tripping hazards) and securely snap onto our mat fastener kit (see photo). Simply install the snap kit on your floor mat, snap on our floor mat ground cord, attach the opposite end (#10 ring terminal) to either the center screw of an AC electrical face plate cover or as is recommended by your ESD program Coordinator. Economical, efficient, secure, easy to use and fully compliant to latest ANSI ESD and MIL standards!

Features

  • Easy to install on any esd or anti-static floor mat!
  • Beveled hooded fastener for reduced tripping hazards!
  • Heavy duty 3/8 fasteners!
  • Generous 15 foot ground cord!
  • Individually packaged for secure deployment!
  • Constructed with a 1 mega ohm resister for safety!
  • Male Fastener on cord, Female fastener kit for mat!
  • Fully compliant to latest standards!

Extended Technical Information

In order to operate effectively all anti static floor mats must be attached to a reliable earth ground connection. UltraStrong floor mat ground cords are an integral component - allowing easy placement (anywhere on the mat) and providing a female 3/8 socket for subsequent attachment to the anti static mat. To achieve reliable grounding of you anti static floor mat the fastener kit must be attached securely to your mat (it must not be loose). Simply puncture a hole in the matting material with a screw driver, awl or punch making sure not to oversize the hole (over sizing this hole may not let the fastener contact the conductive inner scrim of some of the advanced 3 layer anti static floor mat materials). Place the base through the underside of the mat, select the appropriate snap (female), place above base, select the appropriate length screw, place through snap, into base and tighten securely. Use the washer to find tune compression. Attach the ground cord to your snap and attach the ground cord to a reliable common point ground in your building. Each mat requires attachment to electrical ground. Mats should not be daisy chained.

Length

Price ea.

Adjust Quantity 

Add to Shopping Cart

15'

$8.30
Qty:  

AntiStatic Mat Cleaner
PN: ElectraMat Quart

esd mat cleaner photoIt's important to keep your esd matting cleaned and conditioned with the appropriate products. Many "off the shelf cleaners" contain electrically insulative mat protectants and surfactants that can leave a residue. These contaminants can easily interfere with the static conductivity of  an ESD mat.

 

ElectraMat contains powerful surfactants and cleaners that have been specifically designed to not leave this residue and also contains an antistatic mat rejuvenator that helps condition the matting while imparting specific antistatic properties. The quart container is shipped with a high quality trigger sprayer that won't leak and is designed to provide years worth of reliable service. Simply spray on the mat, allow a minute while the surfactants works on the dirt and grime and wipe off with a clean lint free paper towel or cloth.

 

Size

Price ea.

Adjust Quantity 

Add to Shopping Cart

Quart

$8.22
Qty: