ElectraSeal Anti Static Concrete Sealer
3 YEAR LIFE EXPECTANCY, COMPLIANT TO ANSI/ESD SPECIFICATIONS!
ELECTRASEAL ANTI STATIC ESD CONTROL EPOXY FLOOR PAINT!
Limited Warranty: United SCP Incorporated expressly warrants that for a period of (1) year from the date of purchase ElectraSeal Concrete Sealer, when applied to an unsealed concrete cast in place slab will fully meet Unitedís posted material specifications and will further meet normal (defined as foot traffic) serviceable duration wear resistance. ElectraSeal is further Warranted for electrical conductivity that as applied to said slabs, with no topical sealers and maintained in accordance with recommendations provided by United SCP will provide a resistance to ground of <1.0E09 @ >45%rH. Within the Warranty Period, the defective material will be exchanged at United SCPís discretion. No responsibility for the cost of removal, reinstallation, production loss nor freight can be assumed under this warranty. Unused defective products must be shipped prepaid to United SCPís factory. All returns must include RMA number plus invoice copy, packing slip or other proof of purchase from United Static Control Products Incorporated. This number may be obtained by calling Unitedís customer service department at 719 676 3928 (option 1).
Warranty Exclusion: The foregoing warranty is made in lieu of other product warranties expressed or implied including merchantability and fitness for particular purposes which are specifically or indirectly disclaimed. This Warranty will not apply to defects or damage due to improper substrate preparation, unusual abrasive wear situations, chair caster wear, scratching, neglect, misuse, standing water, concrete vapor emissions (when tested via the standard calcium chloride test method) above 8 lbs per 1,000 square feet over a 24 hour period, failure to properly maintain coating or improper installation techniques caused by not following posted directions.
In no event will United SCP or any authorized re-seller of this product be
responsible or liable for any special or consequential losses or damages,
whether based on tort, contract or the use of (or inability to use) the
product. Replacement of material does not include removal of the defective coating,
preparation of substrate, production loss nor freight cost. Before using the product users shall determine the
suitability of ElectraSeal for their intended use by pretesting the
electrical conductivity at their installation site. The user assumes all
risk and liability whatsoever in connection therewith. Fulfillment of United
SCP's warranty obligations will be the customer's exclusive remedy and
United SCP or seller's limit of liability for any breach of warranty or