Click Here for the ElectraSeal Main Page
SDS Sheet: Click Here to Download the Safety Data Sheet in the new SDS Format.
ELECTRASEAL Material Safety Data Sheet SECTION I - IDENTITY
INDUSTRIAL
MAINTENANCE COATING FOR CONCRETE
United Static Control Products Incorporated 4878 Lakeview Cir, Colorado City, CO. USA Telephone Number for Information: 719 676 3928
Emergency Phone
Number:800-255-3924 or Poison
Center
Date
Prepared SECTION II - HAZARDOUS INGREDIENTS
CONTAINS:
GLYCOL ETHERS* <6 SECTION III - PHYSICAL / CHEMICAL CHARACTERISTICS
VOC: <55.0 g/l
Other information California SCAQMD Rule 1113 (5/3/2011): Limit 100 g/l, actual <55.0 g/l COMPLIANT SCAQMD Rule 323.1 (adopted 06/19/2016, effective 01/1/2016): Limit 100, actual <55.0 COMPLIANT
LEED BD+C: Retail / v1 - LEED 1.0 Pilot EQc4: Possible 4 Points Limit: 100 g/l, actual <55 g/l SECTION IV - FIRE AND EXPLOSION HAZARD DATA Flash Point - None
Flammable
Limits: LEL - NA UEL - NA Fire and Explosion Hazards - NA SECTION V - REACTIVITY DATA
Stability -
Stable SECTION VI - HEALTH HAZARD DATA
Routes of entry: CHRONIC: Redness of skin
Carcinogenicity:
NO
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
SECTION VIII - CONTROL MEASURES Respiratory Protection - Not required with normal use.
Ventilation:
Local Exhaust - NA, Mechanical - NA, Special - NA,
Other - Assure fresh air circulation.
Work/Hygienic Practices - Do not eat or drink next to material, wash hands after work. SECTION IX - TRANSPORTATION 49 CFR
Unit Cont. -
55,30,5,1 GAL. PLASTIC CONT Report Qty. (Lbs) -
NA. The information herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of these data or results to be obtained from use thereof. Essentially similar to OSHA form # 174.Vendor assumes no responsibility for injury to vendee or third person proximity caused problems if reasonable safety procedures are not adhered to as stipulated in the data sheet. Additionally, vendor assumes no responsibility for injury to vendee or third persons caused by abnormal use of the material even if reasonable safety procedures are followed. Further more, vendee assumes the risk in use of the material. Document Review 08/10/2016 |