Titanium Series ESD sheet vinyl (or optional tiles): A quantum leap in esd flooring technology. While most esd flooring materials rely on mere conductive adhesives or a sprayed on grid work of carbon to maximize conductivity, Titanium features a full surface electrically conductive backing bonded to a hardened top surface wear layer to provide the ultimate in conductivity, wear resistance and resiliency.  Titanium is provided in a pleasing medium gloss for reduced glare with a unique micro finishing technique that provides the most slip resistant, easiest to clean, lowest maintenance vinyl on the market. Ti's FULLY clean room compliant and highly chemical resistant.  It's a pure vinyl, devoid of cheap clay fillers making it resilient and flexible (not brittle like most esd flooring), hence Titanium can be flash coved up walls and handles heavy loading without breaking. Utilizing Titanium's approved specialty conductive adhesives allows installation simply unheard in the past. When used in conjunction with our unique textile reinforced double sided adhesive, Titanium can be installed over existing epoxy, VCT, non porous hard troweled concrete, painted surfaces and more. Our liquid conductive adhesive is perfect for permanent bonding of the product to porous concrete.  Your needs dictate: permanently bonded OR installed in a mode that allows removal and redeployment of the material in a different area! Titanium, the ultimate choice for clean rooms, electronic and sophisticated product development and manufacturing, command centers and more.  With specifications that meet or exceed the latest most stringent standards including the new  ANSI EOS ESD S 2020 2007, Titanium Tames the Static Beast before it can take another byte!

 

Full surface static conductive backing. Ultimate static control conductivity.

Wear resistant top layer. THE most wear resistant in the industry.

Easily meets stringent NEW standards for optimum conductivity.

Permanent conductivity throughout, NOT humidity dependent.

Anti slip, anti scuff and clean room compliant.

Easy to keep clean, the lowest maintenance floor in the industry.

Installation flexibility!  Can be installed over concrete, existing epoxy, VCT, even asbestos laden tiles! Unlike most esd flooring materials Ti is resilient and won't break or crumble.

Why Sheet goods? Titanium Series esd flooring is available in sheet goods (or optional tiles) for a very good reason. Let's look at a 150' x 60' area.  A typical 1' x 1' ESD tile will have over 18,000 linear feet (nearly 4 MILES of seams)! Take a look at any tile floor or this typical esd TILE floor.  Unfortunately tiles don't always fit perfectly and the installer must adjust (leave small spaces between the tiles) as the installation progresses (some tiles even shrink over a period of time). And / or the substrate isn't flat leaving an uneven profile (slight highs and lows) to the finished install.  Minute spaces between the tiles and  / or deviations in the flatness, a perfect environment for contaminant and dirt entrapment. On a standard tile floor these deviations typically present little problem, they are often filled in with floor wax. Esd floor finish shouldn't be a necessity for a quality esd floor.  It raises the insulative properties, can wreak havoc in a clean room (from powdering), is expensive and can be a maintenance application nightmare!

Titanium sheet goods, same area? less than 2,000 linear feet of seams and THESE seams are heat welded for the ultimate in cleanliness and ease of maintenance.

Why ESD Tiles? Titanium Series esd flooring is also available in a convenient 2' x 2' vinyl tile. ESD tiles are somewhat easier to install compared to sheet vinyl and with Titanium's resilient vinyl properties the tiles can be flash coved up walls or more easily cut to tightly conform to columns and even server racks. PLUS tiles are easier to repair should they become stained, burned or torn!