|
ElectraBrush®
ESD Brushes
6.5" x 7/8" Anti Static Brush
Medium
firm bristles, heat resistant, nylon fibers that won't slough
carbon. Wooden handle coated with a static
dissipative coating. Metallic fiber holder permanently bonds static dissipative
100% 6.12 nylon bristles
for a very slow and controlled discharge of static electricity thru the
grounded technicians hand.
WT-05:
6 and 1/2" long anti static pencil style brush. Used to remove particulate and static laden dust and debris.
Features a wooden handle coated with an antistatic coating
bonded to a metallic brush holder that bonds the permanently
antistatic bristles. Helps to equalize the
static potential between the brush fibers, handle and technician for
the subsequent discharge of the accumulated charges through the primary ground system
for the technician. Heat resistant and resistant to most common
chemicals used in the electronic assembly environment. Perfect
for electronic manufacturing and excellent for working with high
voltage equipment.
Click here for large
photo
-
Static dissipative handle
-
Static dissipative fibers
help control electrostatic generation.
-
Chemical resistant brush
head.
-
Clean brush fibers, no
carbon sloughing.
-
Excellent for use around
many high voltage power sources.
-
Heat resistant brush fibers.
Detail |
Value |
Bristle Type |
Medium soft,
nylon, non marring, 0.12mm bristles |
Fibers per ANSI/ESD STM11.12-2007 |
> 1.0E04,
<1.0E11 |
Handle per ANSI/ESD STM11.12-2007 |
> 1.0E04,
<1.0E11 |
Bristle Trim Length |
Approximately 1/8" |
Bristle Head
Height |
Approximately 1/8" |
Bristle Head Width |
Approximately 3/4" |
Handle Length / Total Length |
5.5 inches
/ 6.5 inches |
Handle Width |
1/4 to
1/2" Tapered and Round |
Heat Resistance |
80 degrees
C. / 176 deg F. |
Supplied in units of 1, 10 and 25 |
Part Number:
WT-05 |
Click HERE to Contact United SCP
© All rights Reserved
*
|
|