 UNITED Static Control Products Contact us | Live Chat | Telephone 719 676 3928 | Search |
|
PolyFlor ESD FlooringHardwearing contract sheet vinyl or tiles* ULTIMATE Options in Conductivity! Static Conductive (for use in electronic manufacturing) to Static Dissipative (perfect for pharmaceutical manufacturing, clean rooms and more)!
PolyFlor SD (Tiles or Sheet Goods, see the bottom of this page for pricing)
Engineered for use where static control is required but the resistance level doesn't need to be as low as that produced by conductive flooring. It's prefect for reducing nuisance static but we don' recommend it for use in electronic manufacturing. It is designed to work in conjunction with a relative humidity of 40% or higher. PolyFlor SD Contains ZERO carbon so it is an extremely clean product to work with. Normal use areas are computer rooms, healthcare facilities and scanner rooms. The material is available in both tiles and sheet good. It is homogenous, 100% recyclable and contains a 25% recycled material content. ElectraFloor SD Plus features an A+ BREA environmental rating in the Green Guide. Installation Grounding Specifications Options in Conductivity Specifier Sheet
PolyFlor Finesse SD (Tiles or Sheet Goods, see the bottom of this page for pricing)
Engineered for use where static control is required but the electrical resistance level doesn't need to be as low as that produced by conductive flooring. It's prefect for reducing nuisance static but we don't recommend it for use in electronic manufacturing. It is designed to work in conjunction with a relative humidity of 40% or higher. ElectraFloor Contains ZERO carbon so it is an extremely clean product to work with. Normal use areas are computer rooms, healthcare facilities and scanner rooms. The material is available in both tiles and sheet goods. It is homogenous, 100% recyclable and contains a 25% recycled material content. ElectraFloor SD Plus features an A+ BREA environmental rating in the Green Guide. Installation Grounding Specifications Options in Conductivity Specifier Sheet
PolyFlor OHMega (Sheet Goods Only, see the bottom of this page for pricing
Engineered for use where static control is a necessity and meeting the latest ANSI ESD S20.20-2014 Standards is a must! It's prefect for use in THE most sensitive of static control environments from electronic manufacturing to ESD sensitive equipment. OHMega EASILY meets ANSI/ESD S20.20-2014 with a charge generation when tested to 97.2 of well under 100 volts! ElectraFloor Advanced is not dependent on humidity for its conductivity. PolyFlor OHMega lays flat, features outstanding wear characteristics and provide ULTIMATE Static Control Properties. OHMega is100% recyclable and contains a 25% recycled material content. OHMega features an A+ BREA environmental rating in the Green Guide. Installation Grounding Specifications Options in Conductivity Specifier Sheet
ElectraFloor High Conductivity (available in full rolls only)
Engineered for munitions, ordinance and manufacturing areas where explosive and flammable agents are stored. It is non sparking and HIGHLY CONDUCTIVE and for use by trained personnel only. It DOES NOT meet the minimum resistance values for compliance to D.O.D. 4145-26M This material's electrical range falls below the industry accepted recommendations of greater than 2.5E04 hence it may present a significant electrocution hazard to personnel that may come into contact with a high voltage power supply or wiring. NOTE: This product is NOT recommended for use in electronic manufacturing. Color: Solid Black Only and only available in full rolls. Allow at least 8 weeks for delivery.
PolyFlor Pricing Contact us for a hard copy quote!
Pricing valid as of 11/17/21
Contact United Static Control Products Tame the Static Beast Before it Takes another Byte! © All rights Reserved
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
